NightStar Technical Specs

• Polycarbonate, waterproof housing - Tough enough to take extreme/repeated impacts
• Bright white LED - rated for 100,000 hours of operation drawing up to 5.4 Volts (NightStar CS series rated for 50,000 hours).
• Charging magnet - core strength of 30 million Gauss with a surface strength of 5200 Gauss (NightStar CS is smaller - contact us for exact figures).
• Wire Coil - coil that the magnet passed through to generate electricity
• 1 Farad 5.5 Volt capacitor - holds the charge generated by passing the magnet through the coil
• Glow-in-the-dark switchs - allows the NightStar to be turned on and off without penetrating the waterproof housing
• Plastic lens - focuses and concentrates the light from the LED

Size and Operating conditions

Temperature:	Storage:-50°F (-45°C) to +140°F (60°C) Operation: -40°F (-40°C) to +130°F (55°C)
Pressure:	Operational at an ocean depth of 180 ft. (55m) Performance unaffected after being driven over by 4 x 4 truck on concrete surface.
Chemical Resistance:	Unaffected by salt water, alcohol, and ammonia based cleaners. Dissolve resistant against medium strength acids.
Shock:	Fully functional after repeated random drops from a height of 6 ft (2m) onto a concrete surface.
Weight / Mass:	NightStar: 14 ounces / 390 grams NightStar CS:
Size:	NightStar 11" (28cm) long x 2.5" (7cm) diameter (max) NightStar CS

Light Output vs Time for the NightStar
and another kinetic flashlight
Foot Candles vs Seconds
(applies only to original NightStar with white LED)

Scale: 0-400 Foot candles vs 0-600 seconds

Light Spectrum of the white LED NightStars
Relative Luminosity vs Wavelength (Nanometers)

Scale: 0-1 Relative Luminosity vs 350-850 Nanometers